|
Post by xtreme on Aug 26, 2008 14:42:54 GMT -10
fs, all these came off of a 2005 silverado. may fit other trucks, check before buying.
used 5.5" cast iron tapered blocks-$50 used 2" cast non tapered blocks-$30 used 1" aluminum blocks-$20 used 2.5 degree shim-$20 new 16" long u-bolts-$100 (as far as i know, no one carries this size on kauai) barely used 3" tapered block-$40
5.5" blocks will be ready for sale this weekend. everything else os off the truck already.
|
|
|
Post by serturbo on Aug 27, 2008 6:59:14 GMT -10
Post pix when the truck is done. I wanna see it ridin level.
|
|
|
Post by xtreme on Aug 27, 2008 7:41:54 GMT -10
should have pics by sunday. hopefully it levels out.
|
|
|
Post by serturbo on Aug 27, 2008 20:31:16 GMT -10
It will look sick if it turns out right.
|
|
|
Post by xtreme on Aug 27, 2008 21:43:15 GMT -10
if the back goes too high, i got 1 ton torsion bars waiting to go in the front
|
|
|
Post by serturbo on Aug 28, 2008 6:59:57 GMT -10
How's the ride with those?
|
|
|
Post by xtreme on Aug 28, 2008 7:11:24 GMT -10
How's the ride with those? It will be stiff, thats why i'm debating weather to put them on or not, but i think with better shocks with the right valving the ride could be alright. The passenger side torsion bar is sagging, its adjusting bolt almost maxed out, where as the driver side torsion bar bolt can adjust alot more. I won't install it if I don't need to.
|
|
|
Post by serturbo on Aug 28, 2008 12:20:34 GMT -10
Cannot just get another passenger side torsion? Or will it probably sag again?
|
|
|
Post by xtreme on Aug 28, 2008 13:12:14 GMT -10
Cannot just get another passenger side torsion? Or will it probably sag again? probably could but after a while it will sag again. driver side will sag eventually. with all the issues with lifted trucks now. i might just drop it down.
|
|
|
Post by xtreme on Sept 1, 2008 20:47:13 GMT -10
back is done, front is almost done: a little ass high....
|
|
|
Post by xtreme on Sept 3, 2008 13:45:47 GMT -10
adding a 3" tapered block to the list......
|
|